Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 750

Default Settings
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 29-3
Parameters
FICON feature
Port numbers
FC ID last byte value
EBCDIC format option
Switch offline state
Mainframe users
Clock in each VSAN
Host clock control
SNMP users
Port address
Prohibited ports
Cisco MDS 9000 Family CLI Configuration Guide
29-50
Default FICON Settings
Default
Disabled.
Same as port addresses.
0 (zero).
US-Canada.
Hosts are allowed to move the switch to an offline state.
Allowed to configure FICON parameters on Cisco MDS
switches.
Same as the switch hardware clock.
Allows host to set the clock on this switch.
Configure FICON parameters.
Not blocked
Ports90–253 and 255 for the Cisco MDS 9200 Series
switches.
Ports250–253 and 255 for the Cisco MDS 9500 Series
switches.
Chapter 29 Configuring FICON
OL-18084-01, Cisco MDS NX-OS Release 4.x