Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Number reserved FCIDs: 61697
Use the show fcdomain address-allocation cache command to display the valid address allocation
cache. The cache is used by the principal switch to reassign the FC IDs for a device (disk or host) that
exited and reentered the fabric. In the cache content, VSAN refers to the VSAN that contains the device,
WWN refers to the device that owned the FC IDs, and mask refers to a single or entire area of FC IDs.
See
Example 18-9 Displays Address Allocation Information
switch# show fcdomain address-allocation cache
Cache content:
line#
-----
Default Settings
Table 18-2
Table 18-2
Parameters
fcdomain feature
Configured domain ID
Configured domain
auto-reconfigure option
contiguous-allocation option
Priority
Allowed list
Fabric name
rcf-reject
Persistent FC ID
Allowed domain ID list configuration distribution Disabled.
Cisco MDS 9000 Family CLI Configuration Guide
18-22
Example 18-9.
VSAN
---- -----------------------
1. 12 21:00:00:e0:8b:08:a2:21
2. 6 50:06:04:82:c3:a1:2f:5c
3. 8 20:4e:00:05:30:00:24:5e
4. 8 50:06:04:82:c3:a1:2f:52
lists the default settings for all fcdomain parameters.
Default fcdomain Parameters
WWN FCID
--------
0xef0400
0xef0002
0xef0300
0xef0001
Default
Enabled.
0 (zero).
Preferred.
Disabled.
Disabled.
128.
1 to 239.
20:01:00:05:30:00:28:df.
Disabled.
Enabled.
Chapter 18 Configuring Domain Parameters
mask
-----------
ENTIRE AREA
SINGLE FCID
ENTIRE AREA
SINGLE FCID
OL-18084-01, Cisco MDS NX-OS Release 4.x