Auto-Topology Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Example Configurations
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
mds(config)# exit
mds#
Verify the IVR zone set activation.
Step 12
mds# show ivr zoneset active
zoneset name tape_server1_server2
zone name tape_server1
zone name tape_server2
Verify the zone set updates. Upon successful IVR zone set activation, verify that appropriate zones are
Step 13
added to the active zone set. Repeat this step for VSANs 2 and 3.
mds# show zoneset active vsan 1
zoneset name finance_dept vsan 1
zone name accounts_database vsan 1
zone name IVRZ_tape_server1 vsan 1
zone name IVRZ_tape_server2 vsan 1
zone name $default_zone$ vsan 1
mds# show ivr zoneset status
Zoneset Status
______________
status per vsan:
__________________

Auto-Topology Configuration

This section provides example configuration steps for configuring IVR auto-topology.
Enable IVR on every border switch in the fabric.
Step 1
switch# config t
Enter configuration commands, one per line.
switch(config)# feature ivr
switch(config)# exit
switch#
Cisco MDS 9000 Family CLI Configuration Guide
23-42
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:02:66:45:00:20:89:04 vsan 2
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:00:ad:51:78:33:f9:86 vsan 3
pwwn 10:00:23:11:ed:f6:23:12
pwwn 10:00:56:43:11:56:fe:ee
pwwn 10:02:66:45:00:20:89:04
pwwn 10:02:50:45:32:20:7a:52
pwwn 10:02:50:45:32:20:7a:52
pwwn 10:00:ad:51:78:33:f9:86
name : tape_server1_server2
state : activation success
last activate time : Tue May 20 23:23:01 1980
force option : on
vsan status
____ ______
1 active
Chapter 23 Configuring Inter-VSAN Routing
End with CNTL/Z.
OL-18084-01, Cisco MDS NX-OS Release 4.x