Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 13 Configuring Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Default Settings

Table 13-7
Table 13-7
Parameters
Interface mode
Interface speed
Administrative state
Trunk mode
Trunk-allowed VSANs or VF-IDs
Interface VSAN
Beacon mode
EISL encapsulation
Data field size
OL-18084-01, Cisco MDS NX-OS Release 4.x
lists the default settings for interface parameters.
Default Interface Parameters
Default
Auto
Auto
Shutdown (unless changed during initial setup)
On (unless changed during initial setup) on
non-NPV and NPIV core switches. Off on NPV
switches.
1 to 4093
Default VSAN (1)
Off (disabled)
Disabled
2112 bytes
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
13-43