Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 15 Configuring Generation 2 and Generation 3 Switching Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Default Settings

Table 15-21
Table 15-21
Parameter
Speed mode
Rate mode
Port mode
BB_credit
buffers
Performance
buffers
1. The 4-port 10-Gbps switching module only supports 10-Gbps traffic.
2. Auto port mode on the 12-port 4-Gbps switching module interfaces can operate in E port mode, TE port mode, and Fx port
3. Auto port mode on the 4-port 10-Gbps switching module interfaces can operate in E port mode, TE port mode, and F port
4. Performance buffers are shared among all ports on the module.
Table 15-22
Table 15-22
Parameter
Speed mode
Rate mode
Port mode
BB_credit buffers
1. Auto_max_4G speed mode on the 4/44-port 8-Gbps switching module negotiates to a maximum speed of
OL-18084-01, Cisco MDS NX-OS Release 4.x
lists the default settings for Generation 2 interface parameters.
Default Generation 2 Interface Parameters
Default
48-Port 4-Gbps
Switching Module
auto
shared
Fx
16
–
mode.
mode.
lists the default settings for Generation 3 interface parameters.
Default Generation 3 Interface Parameters
Default
48-Port 8-Gbps
Switching Module
auto
shared
Fx
32
4 Gbps.
24-Port 4-Gbps 12-Port 4-Gbps
Switching Module Switching Module
1
auto auto
shared dedicated
Fx auto
16 250
– 145
24-Port 8-Gbps
Switching Module
1
auto
shared
Fx
32
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
4-Port 10-Gbps
Switching Module
1 1
auto
dedicated
2 3
auto
250
4 5
145
4/44-Port 8-Gbps
Host-Optimized Switching
Module
1
auto_max_4G
shared
Fx
32
15-55