Configuring Ssh Services - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring SSH Services

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
no password set. Local login not allowed
Remote login through RADIUS is possible
Example 32-8 Displays Information for All Users
switch# show user-account
show user-account
user:admin
user:usam
user:msam
user:user1
no password set. local login not allowed
Remote login through RADIUS is possible
Configuring SSH Services
A secure SSH connection, with rsa key is available as default on all Cisco MDS 9000 Family switches.
If you require a secure SSH connection with dsa key, you need to disable the default SSH connection,
Generate a dsa key and then enable the SSH connection (see the
section on page
Use the ssh key command to generate a server key.
If you are logging in to a switch through SSH and you have issued the aaa authentication login default
Caution
none command, you must enter one or more key strokes to log in. If you press the Enter key without
entering at least one keystroke, your log in will be rejected.
This section includes the following topics:
•
•
•
•
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
32-14
this user account has no expiry date
roles:network-operator
this user account has no expiry date
roles:network-admin
expires on Sat May 31 00:00:00 2003
roles:network-admin network-operator
this user account has no expiry date
roles:network-operator
this user account has no expiry date
roles:network-operator
32-15).
About SSH, page 32-15
Generating the SSH Server Key-Pair, page 32-15
Specifying the SSH Key, page 32-15
Overwriting a Generated Key-Pair, page 32-16
Clearing SSH Hosts, page 32-17
Enabling SSH or Telnet Service, page 32-18
Displaying SSH Protocol Status, page 32-18
SSH Authentication Using Digital Certificates, page 32-19
Chapter 32 Configuring Users and Common Roles
"Generating the SSH Server Key-Pair"
OL-18084-01, Cisco MDS NX-OS Release 4.x