Clearing The Fabric Binding Statistics; Deleting The Fabric Binding Database; Verifying Fabric Binding Configurations - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Fabric Binding Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Clearing the Fabric Binding Statistics

Use the clear fabric-binding statistics command to clear all existing statistics from the fabric binding
database for a specified VSAN.
switch# clear fabric-binding statistics vsan 1

Deleting the Fabric Binding Database

Use the no fabric-binding command in configuration mode to delete the configured database for a
specified VSAN.
switch(config)# no fabric-binding database vsan 10

Verifying Fabric Binding Configurations

Use the show commands to display all fabric binding information configured on this switch (see
Examples
Example 40-1 Displays Configured Fabric Binding Database Information
switch# show fabric-binding database
--------------------------------------------------
Vsan
--------------------------------------------------
1
1
1
4
4
4
61
61
61
[Total 7 entries]
Cisco MDS 9000 Family CLI Configuration Guide
40-6
Use the fabric-binding database diff active vsan command to view the differences between the
active database and the config database. This command can be used when resolving conflicts.
switch# fabric-binding database diff active vsan 1
Use the fabric-binding database diff config vsan command to obtain information on the
differences between the config database and the active database.
switch# fabric-binding database diff config vsan 1
Use the copy running-config startup-config command to save the running configuration to the
startup configuration so that the fabric binding config database is available after a reboot.
switch# copy running-config startup-config
40-1
to 40-9).
Logging-in Switch WWN
21:00:05:30:23:11:11:11
21:00:05:30:23:1a:11:03
20:00:00:05:30:00:2a:1e
21:00:05:30:23:11:11:11
21:00:05:30:23:1a:11:03
20:00:00:05:30:00:2a:1e
21:00:05:30:23:1a:11:03
21:00:05:30:23:11:11:11
20:00:00:05:30:00:2a:1e
Domain-id
0x66(102)
0x19(25)
0xea(234) [Local]
Any
Any
0xea(234) [Local]
0x19(25)
0x66(102)
0xea(234) [Local]
Chapter 40
Configuring Fabric Binding
OL-18084-01, Cisco MDS NX-OS Release 4.x

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents