Ciu 888 And Service Tool Compatibility Matrix; Recommended Workflows To Commission Ciu 888 - Honeywell CIU 888 Configuration Manual

NOTE: For Ensite pro database See chapter 3.2.4 "Ensite pro database import
Part No.: 4417584_Rev12
Introduction
The applicable configuration tools and scenarios to configure CIU 888
are mentioned in the following table.
Use Ensite Pro + Migration tool + Web
Supported scenarios:

CIU 880 being replaced by CIU 888,
except 4 plus host ports in redundant
non cross hot standby configuration.

Earlier units of CIU 888 being
replaced with new units of CIU 888.
option".

1.1.1 CIU 888 and Service Tool Compatibility Matrix

CIU 888 Version
R103.1/R103.2
R120.1
R120.2
R130.1
R140
R150
R160
R161
R162
R210

1.2 Recommended workflows to commission CIU 888

This section gives details on how to commission a CIU 888 (both
redundant and non-redundant), and how to update the site configuration
details of an existing CIU 888.
Configuration Manual
CIU 888
interface
Service Tool Version
Service Tool R101.1
Service Tool R120.1
Service Tool R120.2
Service Tool R130.1
Service Tool R140
Service Tool R150
Service Tool R160
Service Tool R161
Service Tool R162
Service Tool R210
Use CIU 888 Service Tool
Supported scenarios:

CIU 880 being replaced by CIU 888
with 4 plus host ports in redundant
non cross hot standby configuration
(new configuration).

New sites being commissioned for
CIU 888.

CIU880 Migrations through Ensite
Pro database import
1 - 2