Honeywell CIU 888 Configuration Manual page 104

NOTE: Make sure that Gauge Units of Measurement matches with the Units of
TABLE 3-1
Part No.: 4417584_Rev12
Getting Started
14.Click the Units of Measurement tab, the Properties detail appears.
You can view or edit these properties:
Properties
Level
Temperature
Vapour Pressure
Water
Density
Vapour Temperature
Product Pressure
Measurement configured in the gauge. Default gauge Units of Measurement
are based on the configured global Units of Measurement.
Special Characters
Special Characters
TOI
Configuration Manual
CIU 888
Description
Select m, mm, ft, in, in/16, fis, or 1/256 in.
Select °C or °F
2
Select kgf/cm , Pa, kPa, psi, psi_r100, or psi_r1000
Select m, mm, ft, in, in/16, fis, or 1/256 in.
3 3
Select kg/m , °API, lbs/ft
Select °C or °F
2
Select kgf/cm , Pa, kPa, psi, psi_r100, or psi_r1000
Description
A = 802/812 gauge.
B = 811 gauge with GPU protocol and devices with
gauge type=B.
C = 813 MGT and devices with gauge type=C.
E = 811 gauge with external alarms and devices with
gauge type=E.
M = 816 /818.
, RD60, or lbs/US gal.
3 - 74