Setting Up The Site Configuration; Configuration Procedure In Ciu 888 Service Tool - Honeywell CIU 888 Configuration Manual

FIGURE 4-6
Part No.: 4417584_Rev12
Commissioning of a Standalone System Setup
3. Click View License to view the details of the license currently
installed on the CIU 888.
The View License window is displayed (see FIGURE 4-6).
CIU 888 Web interface: View License window
4. Verify if the correct license is installed on the CIU 888. If not, contact
Honeywell.

4.3 Setting up the site configuration

After the initial set up of the CIU 888 is completed, set up the site
configuration using CIU 888 Service Tool. The site configuration can be
set either by:
Creating a new site configuration, see section 3.2.

or
Importing an existing CIU 888 site configuration, see section 3.6.


4.3.1 Configuration procedure in CIU 888 Service Tool

Perform the following procedure to configure a site using CIU 888
Service Tool:
1. Preparation
Before starting the creating and configuring the site, a number of
details must be known, e.g. site layout, information about field
cabling, tag names of site elements (i.e. gauges, tanks and CIUs),
tank information (tank strapping tables or tank capacity tables, roof
Configuration Manual
CIU 888 4 - 5