Honeywell CIU 888 Configuration Manual page 135

Part No.: 4417584_Rev12
Getting Started
5. The various fields seen in the window and a brief description on each
of the them are given in the following table.
Fields
Modbus Configuration
Name
Unit ID
Turn around Delay
Modbus mapping
Configuration Manual
CIU 888
Description
This indicates the Modbus configuration name. This
shall be used to identify a Modbus map configuration for
a Modbus TCP/IP client.
This refers to the unit identifier in case of the Modbus
TCP/IP client request. Different Modbus maps should
have unique unit identifier configured so that when a
Modbus TCP/IP client requests with a Unit Identifier,
CIU shall pick up the corresponding Modbus map and
present the data accordingly.
This refers to the CIU's response to any Modbus
requests after the specified turn around delay in milli
seconds.
Value is from 0 to 65535. Default value is 20.
This indicates the Modbus mapping type. Supported
types are:
•
Entis Pro Complaint
•
User specified
•
CIU Plus Complaint
•
ENTIS Compliant
For more information on User specified modbus maps,
refer to section 3.2.12.1 and section 3.2.12.2
3 - 105