Honeywell CIU 888 Configuration Manual page 59

Part No.: 4417584_Rev12
Getting Started
Properties
System decimal separator
System thousand separator
Code CRC fault behavior
Sync Link Timeout
3.2.5.2 Modify Ambient Temperature Properties
1. Click the Ambient Temperature tab, the properties detail appears.
You can view or edit these properties:
Properties
Ambient temp. gauge address
Ambient temp. gauge TOI
Ambient temp. gauge TOR
Ambient temp. scan enabled
* Refer to TABLE 3-1 for additional information.
Configuration Manual
CIU 888
Description
Select (point) or ,(comma)
This indicates the decimal separator in which
data would be presented to the user in CIU
888 Service tool and CIU 888.
Select (point), space or ,(comma)
This indicates the thousand separator in
which data would be presented to the user in
CIU 888 Service tool and CIU 888.
This option sets the CIU behavior in the case
of code CRC check failure.
•
Stop functioning - CIU core functionality
stops.
•
CIU operations continue with data set to
recalibrated and CIU CRC (Entity96)
marked as corrupted so that Signature
Alarm will be raised in Entis Host System.
This indicates the time interval after which
passive CIU would set all the field and calcu-
lated values to timeout status when sync link
is broken.
Description
Enter ambient temperature transmission
address.
Select A, B, C, E or M*.
Select C or ZAG*.
Check to enable ambient temperature scan.
3 - 29