Honeywell CIU 888 Configuration Manual page 101

Part No.: 4417584_Rev12
Getting Started
Properties
Density in foreground
scan
DP data invalidate time-
out
* Refer to TABLE 3-1 for additional information.
10.Click the Vapour Pressure tab, the Properties detail appears.
You can view or edit these properties:
Properties
Vapour temp & pressure
enabled
Pressure Type:
Absolute pressure
Relative pressure
Pressure address
Pressure TOI
Pressure TOR
Vapour Pressure in fore-
ground
scan
* Refer to TABLE 3-1 for additional information.
Configuration Manual
CIU 888
Description
Check to enable the option.
This is a configurable time period after which the sys-
tem will set the density profile related entities to invalid
Description
Check to enable vapour pressure scan.
Select if applicable.
Select if applicable.
Enter vapour pressure transmission address.
Select: B, C, E, or M*.
Select: ZP3*.
Check to enable the Pressure in foreground
scan.
3 - 71