Honeywell CIU 888 Configuration Manual page 120

3.2.12.3 User defined modbus map - Profiles
Part No.: 4417584_Rev12
Getting Started
Properties
.
Definitions
Entity ID
Entity Name
Type
Size
Scale
Offset
This section helps the user to configure the Temperature Profiles
Modbus area in CIU 888.
The configurable Temperature Profile fields and a brief description on
each of them are given in the following table.
Fields
Temperature Profile
Absolute Start address
Temperature Profile
Record Interval
Configuration Manual
CIU 888
Description
Click this button to move the selected entity in the
'Selected entities' to the 'Available Entities'.
Click this button to move the selected entity in the
'Selected entities' one position up.
Click this button to move the selected entity in the
'Selected entities' one position down.
Click this button to select 'Entis Pro' compliant entities
in 'Selected entities'.
Entity ID number
Name of the Entity
Modbus data type of the entity.
Number of Modbus registers
Scaling factor
Offset value
Description
This indicates the absolute start address of the tem-
perature profiles record.
Values are in decimal. Default value is 20000. Configu-
rable when modbus mapping is User Specified.
This indicates the record interval of the temperature
profiles record.
Values are in decimal. Default value is 125. Configu-
rable when modbus mapping is User Specified.
3 - 90