Verifying The Working Of The System Setup; Sealing The Ciu 888S - Honeywell CIU 888 Configuration Manual

NOTE: The ENTIS client certificate is valid for a period of 1 year after which a new
NOTE: If the CIU 888s do not feature the option to be sealed, the W&M lock key
Part No.: 4417584_Rev12
Commissioning of a Redundant System Setup
d) Click on Close and when prompted for a restart, click on
Yes.Once the CIU restarts, ENTIS will communicate with the CIU
securely over OPC.
certificate will be generated. The new certificate must be approved in a similar
way.

5.12 Verifying the working of the system setup

The final step in the commissioning procedure is verifying if the
redundant CIU 888 system setup is working properly. See section 4.10
for more information.

5.13 Sealing the CIU 888s

If the CIU 888s sealing option is licensed, the next step is to have them
sealed by a representative of the LM authorities or by a LM accredited
user. Refer to the CIU 888 Sealing Guide (Part No. 4417595) for more
information.
switches and configuration lock key switches can either be locked or left
unlocked.
Configuration Manual
CIU 888 5 - 8