Honeywell CIU 888 Configuration Manual page 110

3.2.10.4 TRL/2 Data Input
NOTE: TRL2 device configuration file for Honeywell Radar TRL2 gauge, Rex RTG
Part No.: 4417584_Rev12
Getting Started
Properties
Device Engineering Unit
The CIU 888 collects measurement data like Product level, Product
temperature etc., from the TRL2 gauges and exposes the data in its
Modbus output (Modbus RTU and Modbus TCP/IP) based on the
configuration. Using this mechanism any Modbus host system can get
the data from CIU 888 and visualize it in its user interface.
The CIU 888 also collects temperature profiles data from the TRL2
gauges and exposes the data in its Modbus output (Modbus RTU and
Modbus TCP/IP) based on the configuration. The CIU 888 collects data
for a maximum of 14 temperature elements. Using this mechanism any
Modbus host system can get the temperature profiles data from CIU
888 and visualize the data in its user interface.
The following steps detail out the configuration procedure.
1. On the CIU 888 node, right-click and choose Import TRL/2 device
type file.
gauge, SDAU2100, Honeywell VITO are available by default in the CIU 888
Service tool. For new field device, import its TRL2 device configuration file to
the CIU 888 Service tool.
Configuration Manual
CIU 888
Description
This indicates the unit in which data is exposed by the
Modbus field device. For example, E+H ProServo Mod-
bus field device can expose "Liquid Level" parameter in
5 different units (mm, cm, m, ft, inch) and the user has
to select the appropriate device unit based on the Mod-
bus field device configuration.
3 - 80