Honeywell CIU 888 Configuration Manual page 78

Part No.: 4417584_Rev12
Getting Started
You can add a new Tank Capacity Table or view an existing one.
Properties
Tank Capacity Table
Browse
View
Note: A selected tank capacity table file is only accepted if the used engineering
units match the global selected engineering units of the site configuration.
17.On the Tank1 node, right-click and choose Add Water Tank
Capacity Table
The following window appears.
You can add a new Water Tank Capacity Table or view an existing one.
Properties
Water Tank Capacity
Table
Configuration Manual
CIU 888
Description
Refer to Appendix D for the format of Tank Capacity
Table.
Click 'Browse' to select a tank capacity table. Selected
file is copied to the data environment of the selected
site (C:\Users\Public\Documents\Honeywell\CIU 888
Service Tool\SiteDatabase\<sitename>\STR.
The copied file gets the name [Tank name].txt.
Click 'View' to view the tank capacity table.
Description
Refer to Appendix D for the format of Water Tank
Capacity Table.
3 - 48