Honeywell CIU 888 Configuration Manual page 55

Part No.: 4417584_Rev12
Getting Started
2. Type the Site name and click OK.
The Global Settings - CIU 888 Service Tool window appears.
The Level can be configurable either -4 or -3 when the unit is m.
The Pressure can be configurable either -1 or -3 when the unit is kPa.
You can view or set the measuring unit of the various parameters in the
Global Settings dialog box.
Settings
Level dimension
Temperature dimension
Density dimension
Pressure dimension
Flow dimension
Volume dimension
Mass dimension
Area dimension
Std. ambient air pressure
Air density
Level resolution
Temperature resolution
Configuration Manual
CIU 888
Units
Select m, mm, ft, in, in/16, fis.
Select ˚C or ˚F
3 3
Select kg/m , ˚API, lbs/ft
2
Select kgf/cm , Pa, kPa or psi (lbf/in
3 3
Select m /min, m /hr, l/min, l/hr bbls/min, bbls/hr, US
gal/min, Us gal/hr or UK gal/hr.
3
Select l, m , US gal or bbls.
Select kg, ton, US ton, lbs or long ton.
2 2 2 2
Select m , mm , ft , in ,yd
Enter ambient air pressure in kPa (default = 101.325
kPa).
Enter air density in kg/m3 (default = 1.226 kg/m3).
This entity contains the desired resolution for rounding
in communication of level values.
For meter (m) unit of measure, the resolution can be
configured as -4 or -3 and the default selection is -4
For millimeter (mm) unit of measure, the resolution can
be configured as -1 or 0 and the default selection is -1.
This entity contains the desired resolution for rounding
in communication of temperature values.
, RD60 or lbs/US gal.
2
).
2
3 - 25