Honeywell CIU 888 Configuration Manual page 103

Part No.: 4417584_Rev12
Getting Started
Properties
Relative pressure
Pressure address
Pressure TOI
Pressure TOR
Product Pressure in fore-
ground
scan
* Refer to TABLE 3-1 for additional information.
13.Click the Floating Roof Level tab, the Properties detail appears.
You can view or edit these properties:
Properties
Floating Roof Enabled
Floating Roof Level
address
Floating Roof level 1 TOI
Floating Roof level 1
TOR
Floating Roof level 2 TOI
Floating Roof level 2
TOR
Floating Roof level 3 TOI
Floating Roof level 3
TOR
Floating roof level in fore-
ground
scan
* Refer to TABLE 3-1 for additional information.
Configuration Manual
CIU 888
Description
Select if applicable.
Enter product pressure transmission address.
Select: B, C, E, or M*.
Select: ZP1*.
Check to enable the Pressure in foreground
scan.
Description
Check to enable floating roof levels scan.
Enter floating roof level transmission address.
The TOI of the first floating roof level (B)
The TOR of the first floating roof level (ZHN)
The TOI of the second floating roof level (B)
The TOR of the second floating roof level (ZHO)
The TOI of the third floating roof level (B)
The TOR of the third floating roof level (ZHP)
Set the floating roof to be scanned in the foreground or
background. Default background.
CAUTION:
Setting Floating roof levels scan in foreground would
have impact on the product level and other measure-
ments scan rate.
3 - 73