Configuring Ethernet Host Port - Honeywell CIU 888 Configuration Manual

3.2.13.1 Configuring FTEA and FTEB ports
Part No.: 4417584_Rev12
Getting Started
You can view or edit these properties.
Properties
Available Entities
.
Definitions
Entity ID
Entity Name
Type
Size
Scale
Offset

3.2.13 Configuring Ethernet Host port

1. On the CIU 888 node, click FTEA port.
Configuration Manual
CIU 888
Description
This displays all entities which are not associated with
modbus map.
NOTE:This includes the list of entities provided by CIU
880 Prime and CIU 880 Plus user defined host port
Modbus mapping and also new entities added in CIU
888.
Click this button to move all entities in the 'Available
entities' to the 'Selected entities'
Click this button to move all entities in the 'Selected
entities' to the 'Available Entities'.
Click this button to move the selected entity in the
'Available entities' to the 'Selected entities'.
Click this button to move the selected entity in the
'Selected entities' to the 'Available Entities'.
Click this button to move the selected entity in the
'Selected entities' one position up.
Click this button to move the selected entity in the
'Selected entities' one position down.
Click this button to select 'Entis Pro' compliant entities
in 'Selected entities'.
Entity ID number
Name of the Entity
Modbus data type of the entity.
Number of Modbus registers
Scaling factor
Offset value
3 - 93