Honeywell CIU 888 Configuration Manual page 77

Part No.: 4417584_Rev12
Getting Started
Properties
RD1
RD2
RD3
Hpavg
Vconst
Total cross section area
of FR
Calibration Liquid Density
16.On the Tank1 node, right-click and choose Add Tank Capacity
Table.
The following window appears.
Configuration Manual
CIU 888
Description
Reference distance from top surface measuring pipe 1
to liquid level
Reference distance from top surface measuring pipe 2
to liquid level
Reference distance from top surface measuring pipe 3
to liquid level
Average height top measuring pipe to lowest edge pon-
toon bottom
Liquid volume under the pontoon membrane and bot-
tom, calculated during tank calibration.
Total cross section area of floating roof
Calibration Liquid Density
This is the density (observed) of the product under a
roof, used during tank calibration, in kg/m3
3 - 47