Product Configuration Export And Import - Honeywell CIU 888 Configuration Manual

Part No.: 4417584_Rev12
Getting Started
Properties
Vapour mass calculation

3.2.9 Product configuration Export and Import

Service tool supports product configuration export and import. On
Export, product configuration is saved into a file (JSON). On Import of
the product configuration from a file (JSON), Service tool creates the
products in the CIU configuration database in accordance with the
content specified in the product configuration file.
For sites with multiple CIU 888s, the product settings across all the CIU
configuration databases should be same. When CIU configuration
database is loaded to ENTIS configuration tool, it compares the product
settings across CIU configuration databases and flag an error in case of
a mismatch. For sites with multiple CIUs, the recommendation is to
create all products in one CIU configuration database, export the
product configuration from it and import the same into other CIU
configuration databases.
3.2.9.1 Export of product configuration
1. On the Products node, right-click and click Export Products from the
drop down.
Configuration Manual
CIU 888
Description
This setting is used to indicate which correction
must be applied to the calculated volume.
Selection:
None (no vapour mass) - No correction
applied
S&W corr. (Liq Mass from NSV; no Vap Mass)
– Sediment and Water correction applied
Vapour calc. Liq/Vol ratio ISO/TC28/SC 3N -
LiqVap calculations according Liq/Vol Ratio
ISO DP 4267/1 1982 (ISO/TC28/SC 3 N 411)
Vapour calc. molar method ISO/TC28/SC 3 N -
LiqVap calculations according Molar method
according to ISO DP 4267/1 1982 (ISO/TC28/
SC 3 N 411)
Vapour calc. method API research proj. 44 -
LiqVap calculations according Molar method
according to API research project 44
Vapour calc. molar method ISO 6578 - LiqVap
calculations according Molar method according
to ISO 6578
Notes:
- when S&W correction (NSV calculation) is
selected, Vapour calculations are disabled.
3 - 61