NOTE: For configuring tank refer Section 3.2.7.1
Part No.: 4417584_Rev12
Getting Started
Properties
Browse
View
Note: A selected water tank capacity table file is only accepted if the used
engineering units match the global selected engineering units of the site
configuration.
Note: In case of a separate water sump in the tank, a water TCT can be used and
water TCT should be based on geometry and dimensions of the sump.
3.2.7.2 Configuring tank under Ethernet field port:
On the FTEA port node, click and choose Add > Tank
The "Add site element" window appears
In the name box, type the name and click OK.
The tank1 node is created and displayed under ethernet filed port.
Configuration Manual
CIU 888
Description
Click 'Browse' to select a water tank capacity table.
Selected file is copied to the data environment of the
selected site (C:\Users\Public\Documents\Honey-
well\CIU 888 Service Tool\SiteData-
base\<sitename>\STR.
The copied file gets the name [Water Tank name].txt.
Click 'View' to view the water tank capacity table.
3 - 49