Honeywell CIU 888 Configuration Manual page 100

Part No.: 4417584_Rev12
Getting Started
If one more gauge (5
as 15.
Available slots = 4 - (1*5) = -1 which is not acceptable and CIU 888 does not
allow temperature profile scan enable for the 5th gauge. In this case, the
user needs to disable the tank profiles scan for a gauge that is of no interest
that point in time and enable the tank of interest.
b) Field port has 1 gauge with 15 minutes as temperature profile scan period,
5 gauges with 30 minutes as temperature profile scan period and the user
enables one more gauge for temperature profiles scan with scan period as
30 minutes.
number of slots = 15/3 = 5
number of frames = 30/15 = 2
total slots = 2 * (5 -1) = 8
number of gauges that comes once in one iteration i.e, total number of
gauges with configuration period between 15 and 29 are = 1
Number of gauges that comes once in 2 iterations i.e, total number of
gauges with configuration period between 29 to 44 are = 6
Available slots = 8 - (2*1) - ((2/2)*6) = 0
The CIU 888 accepts the temperature profile scan enable for the 7
If one more gauge (8
888 does not allow temperature profile scan enable for the 8
case, the user needs to disable the tank profiles scan for a tank that is of not
interest that point in time and enable the tank of interest.
9. Click the Density tab, the Properties detail appears.
You can view or edit these properties:
Properties
HIMS (HTMS) enabled
Density dip enabled
Min dip level
Density address
Density TOI
Density TOR
Configuration Manual
CIU 888
th
) is enabled for temperature profiles with scan period
th
) is enabled for temperature profile scan then the CIU
Description
Check to enable density scan from HIMS
configuration.
Check to enable density scan from servo gauge.
Enter minimum density level.
Enter density transmission address.
Select: B, C, or E*.
Select: ZQQ*.
th
gauge.
th
gauge. In this
3 - 70