Honeywell CIU 888 Configuration Manual page 60

Part No.: 4417584_Rev12
Getting Started
Properties
Note: *Configure the Ambient Temperature settings only if ambient temperature is
measured with a GPU gauge. If ambient temperature is measured with a Modbus
gauge then configure it in Modbus Data input (refer to section 3.2.10.2).
If ambient temperature is measured with a TRL/2 gauge then configure it in TRL/2
Data input (refer to section 3.2.10.4)
3.2.5.3 Modify OPC UA Properties
1. Click the OPC UA tab, the properties detail appears.
You can view or edit these properties:
Properties
Protocol type
Server port number
Configuration Manual
CIU 888
Description
Description
This setting depicts the different OPC Proto-
col type. The following type is supported.
0 – OPC UA TCP
Default value: 0
Note: OPC UA HTTPS is not supported
This setting depicts the server port number.
Range 0- 65535
Default value: 51000
3 - 30