Honeywell CIU 888 Configuration Manual page 124

Part No.: 4417584_Rev12
Getting Started
2. By default, FTE tab appears displaying various properties.
You can view or edit these properties.
Parameters
Device name
IP Address
Subnet Mask
Default Gateway
Configuration Manual
CIU 888
Configuration options
This indicates the device name of the Ethernet port.
IP address of the corresponding Ethernet port in the
CIU.
Format: a.b.c.d
Example: 10.70.100.101
Subnet mask of the corresponding Ethernet port in the
CIU. In case of redundant CIUs, this also indicates the
Subnet mask of the corresponding Ethernet port in the
partner CIU.
Format: e.f.g.h
Example: 255.255.255.0
Default Gateway of the corresponding Ethernet port in
the CIU. In case of redundant CIUs, this also indicates
the default gateway of the corresponding Ethernet port
in the partner CIU.
Format: i.j.k.l
Example: 10.79.100.1
Note: If no gateway is required, then this setting can be
left blank.
3 - 94