External Wi-Fi; Figure 61 Wi-Fi; Table 30 Wi-Fi Parameter - Honeywell Performance Series User Manual

External Wi-Fi

The device can be connected via wireless network with an external Wi-Fi
module, and it can reduce the difficulty of device connection without a
network cable.
Make sure that external Wi-Fi module is installed on the device.
Note: This function is supported on select models.
1. Go to Main Menu > Network > Wi-Fi.
Figure 61
2. Select a site and click Connect.

Table 30 Wi-Fi Parameter

Parameter
Connect
Automatically
Refresh
Disconnect
Connect
3. Click Apply.
Performance Series Embedded NVR User Guide
Wi-Fi
Description
After it is enabled, the NVR will connect to the nearest site that was
previously successfully connected after boot-up.
Re-search the site.
Disconnect the current connection.
Select the available sites that you want to connect to. When the NVR is
connected to a site and then select another site to connect, the current
site will be disconnected before the new site is connected.
59