Disarming; Figure 186 Disarming; Figure 187 Setting - Honeywell Performance Series User Manual

Parameter
Alarm Tone
Buzzer
3. Click Apply.

Disarming

You can disarm all alarm linkage actions as needed by just one click.
1. Go to Main Menu > Alarm > Disarming.
2. Select On for Disarming to enable disarming.

Figure 186 Disarming

3. (Optional) To enable disarming as scheduled, click Setting next to

Figure 187 Setting

•
Performance Series Embedded NVR User Guide
Description
Check the box and then select the corresponding audio file from the drop-
down list. System plays the audio file when the alarm occurs.
Refer to File Management
Select the check box to activate the buzzer when an alarm occurs.
Duration of Disarm by Period, and then set periods.
Scheduled disarming is only effective when Disarming is Off.
Drag your mouse to select time blocks.
to add audio file first.
165