Image; Figure 46 Update Interface - Honeywell Performance Series User Manual

Figure 46 Update Interface

2. Update the firmware of the connected remote device.
a. Select a remote device and then click Manual Check.
b. Select a remote device that has new version and then click Online
a. Select a channel and then click File Update.
b. Select update file on the pop-up interface.
c. Select the update file and then click OK.

Image

1. Go to Main Menu > Camera > Image.
42
Online Upgrade
System detects the new version on the cloud.
Update.
After successful operation, system prompts update successful
dialogue box.
File upgrade
After successful operation, system prompts update successful
dialogue box.
If there are too many remote devices, select Device Type from the
drop-down list to search the remote device as needed.
Performance Series Embedded NVR User Guide