Alarm-In Port; Figure 171 Alarm Status - Honeywell Performance Series User Manual

Figure 171 Alarm Status

Alarm-in Port

1. Go to Main menu > Event > Alarm-in Port.
•
•
•
•
148
The Alarm-in Port interface is displayed.
Local: After connect the alarm device to the NVR alarm input port,
system can trigger the corresponding alarm operations when there
is alarm signal from the alarm input port to the NVR.
Network: NVR trigger corresponding alarm operations when it
receives the alarm signal via the network transmission.
CAM Ext: When the network camera connected peripheral device
has triggered an alarm, it can upload the alarm signal to the NVR
via the network transmission. The system can trigger the
corresponding alarm operations.
CAM Offline: When the network connection between the NVR and
the network camera is off, the system can trigger the
corresponding alarm operations.
Performance Series Embedded NVR User Guide