Figure 9 Front Panel (Hen041X3Lv & Hen081X3Lv); Table 10 Nvr Front Panel Description (Hen041X3Lv & Hen081X3Lv) - Honeywell Performance Series User Manual

No.
5
6
7
8
9
10
11
HEN041x3LV & HEN081x3LV
Figure 9 Front Panel (HEN041x3LV & HEN081x3LV)
Table 10 NVR Front Panel Description (HEN041x3LV & HEN081x3LV)
No.
1
2
3
10
Name
CTRL
P
HDMI
VGA
USB port
RS232 debug COM
Network port
MIC OUT
MIC IN
Name
NET
POWER
HDD
Performance Series Embedded NVR User Guide
Description
•
C: Alarm output public end.
Controllable power supply output. Control the output of
the on-off button alarm relay. It controls the alarm device
with the presence or absence of voltage. It can also be
used as power input for some alarm devices such as alarm
detectors.
Power output port. It can provide power to some peripheral
devices such as camera and alarm device. Make sure the
power supply of peripheral device shall be below 1A.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
USB port. Connect to mouse, USB storage device and etc.
It is for general COM debug to configure IP address or
transfer transparent COM data.
10M/100Mbps self-adaptive Ethernet port. Connect to
the network cable.
Audio output port. It is to output the analog audio signal
to the devices such as the sound box.
•
Bidirectional talk output.
•
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as microphone,
pickup.
Description
The light is on when the network connection is abnormal.
The light is on when the power connection is OK.
The light is on when the HDD malfunctions.