Alarm Control - Honeywell Performance Series User Manual

Parameter
Record Channel
PTZ Linkage
Post Record
Tour
Picture Storage
Log
Alarm Tone
Buzzer
4. Click Apply.

Alarm Control

You can set proper alarm output (Auto/manual/off). Connect the alarm
device to the system alarm output port, and set the mode as auto,
system can trigger the corresponding operations when an alarm occurs.
•
•
•
1. Go to Main Menu > Event > Alarm-out Port.
150
Description
Select the check box and select the needed recording channel (support
multiple choices). When an alarm occurs, the NVR device activates the
channel for recording.
You need to enable intelligent recording and auto recording first. For
details, see Schedule.
Select the check box and click Setting to select the channel and PTZ
action. When an alarm occurs, the NVR device associates the channel to
perform the corresponding PTZ action. For example, activate the PTZ in
channel one to turn to the preset point X.
•
Tripwire alarm supports to activate PTZ preset point only.
•
You need to set the corresponding PTZ actions first, see
Control.
At the end of the alarm, the recording extends for a period of time. The
time range is from 10 seconds to 300 seconds.
Select the check box and select the channel for tour. When an alarm
occurs, the local interface of the NVR device displays the selected
channel screen.
•
You need to set the time interval and mode for tour first, see Tour.
•
After the tour is over, the preview interface is restored to the screen
split mode before the tour.
Select the Picture Storage check box to take a snapshot of the selected
channel.
To use this function, go to Main Menu > Camera > Encode > Snapshot,
and then select Event (Trigger) in Type list.
Select the check box, the NVR device records the alarm information in the
log when an alarm occurs.
Check the box and then select the corresponding audio file from the
drop-down list. System plays the audio file when the alarm occurs.
Refer to
Select the check box to activate the buzzer when an alarm occurs.
Auto: Once an alarm event occurs, system can generate an alarm.
Manual: Alarm device is always on the alarming mode.
Off: Disable alarm output function.
The Alarm-out Port interface is displayed.
Performance Series Embedded NVR User Guide
File Management to add audio file first.
PTZ