Figure 202 Heat Map; Figure 203 Setting - Honeywell Performance Series User Manual

Heat Map
Heat map technology can monitor the active objects distribution status
on the specified zone during a period of time and use the different colors
to display on the heat map.
1. Go to Main Menu > VA > Parameters > Heat Map.

Figure 202 Heat Map

2. Select a channel number and then check the box to enable the
3. Click Setting.

Figure 203 Setting

4. Set arm/disarm period. There are two modes for you to set the
Define the period by drawing
•
•
Define the period by editing.
Performance Series Embedded NVR User Guide
The Heat Map interface is displayed.
function.
The Setting interface is displayed.
period so that the system can detect the specified zone.
Select the corresponding date and then use mouse to drag the bar
to set period.
Define for the whole week: Click
to , you can define the period for all the days simultaneously.
Define for several days of a week: Click
one, the icon switches to
selected days simultaneously.
a. Click of the corresponding date, and then set the period on the
next to All, all the icon switches
before each day one by
. You can define the period for the
183