Test Temperature; Ai Live View Mode; Figure 149 Test Temperature - Honeywell Performance Series User Manual

Fisheye De-warp During Playback
When playing back the fisheye record file, you can use de-warp function
to adjust video.
1. On the main menu, click Backup.
2. Select 1-window playback mode and corresponding fisheye
3. Right click the

Test Temperature

When connecting to the front-end device that supports temperature
detection, system can display instant temperature.
Note:
•
•
Refer to
On the preview window, click any position on the thermal channel video.
The interface is shown as below.

Figure 149 Test Temperature

AI Live View Mode

When you select AI mode, the system displays information of human
face, personnel, vehicle and non-motor vehicle on the right side of the
preview interface, and it supports to play back records and display
feature attributes.
1. Right click to select Live Mode > AI Mode.
132
channel, click to play.
, you can go to the de-warp playback interface.
This function may collect the human temperature in the
surveillance video, be careful.
This function is for some series products only.
Display to enable test temperature function.
The AI live view interface is displayed.
Performance Series Embedded NVR User Guide