Setting Up the NVR with the Startup Wizard
After the device initialization, the Startup Wizard opens.
Figure 28 Startup Wizard
Using the wizard, you can:
•
•
•
•
Two-way Talk
Device-end to PC-end
Please connect the speaker or the pickup to the first audio input port on
the device rear panel. Then connect the earphone or the sound box to the
audio output port in the PC.
Log in to the web and then enable the corresponding channel real-time
monitor.
Please refer to the following interface to enable two-way talk.
Performance Series Embedded NVR User Guide
Configure the network settings
Configure P2P
Search for and add IP cameras
Configure Disk Manager
27