Figure 42 Network Interface - Honeywell Performance Series User Manual

Figure 42 Network Interface

9. Set camera IP address.
10. Click Next.
Performance Series Embedded NVR User Guide
Check DHCP, there is no need to input IP address, subnet mask,
and default gateway. Device automatically allocates the IP address
to the camera.
Check Static, and then input IP address, subnet mask, default
gateway and incremental value.
•
If it is to change several devices IP addresses at the same time,
input incremental value. Device can add the fourth address of
the IP address one by one to automatically allocate the IP
addresses.
•
If there is IP conflict when changing static IP address, device
pops up IP conflict dialogue box. If batch change IP address,
device automatically skips the conflicted IP and begin the
allocation according to the incremental value.
The Device Initialization interface is displayed.
39