Wi-Fi Ap; Figure 62 General - Honeywell Performance Series User Manual

Note: •
•

Wi-Fi AP

This function requires the built-in Wi-Fi module in the device, and actual
product shall prevail.
You can configure Wi-Fi parameters for the NVR to ensure that a wireless
IPC can connect to the NVR through Wi-Fi AP.
General Settings
You can configure SSID, encryption type, password and channel of the
device.
Note: •
•
1. Go to Main Menu > Network > Wi-Fi AP > General.

Figure 62 General

2. Select Wi-Fi to enable Wi-Fi.
3. Configure parameters.
60
After the connection is successful, a Wi-Fi connection signal flag
appears in the upper-right corner of the live view interface.
The Wi-Fi module models currently supported are D-LINK, dongle
and EW-7811UTC wireless cards.
This function is supported on select wireless models.
When the wireless IPC and NVR are matched, the pairing will be
completed in 120 seconds after they are powered-on.
The General interface is displayed.
Performance Series Embedded NVR User Guide