Alarm Center; Figure 70 Alarm Center Interface; Table 37 Multicast Parameters; Table 38 Alarm Center Parameters - Honeywell Performance Series User Manual

Table 37 Multicast Parameters

Parameter
Enable
IP Address
Port
3. Click Apply to complete the settings.

Alarm Center

You can configure the alarm center server to receive the uploaded alarm
information. To use this function, the Alarm Upload check box must be
selected.
1. Go to Main Menu > Network > Alarm Center.

Figure 70 Alarm Center Interface

2. Configure the settings for the alarm center parameters.

Table 38 Alarm Center Parameters

Parameter
Enable
68
Description
Enable the multicast function.
Enter the IP address that you want to use as the multicast IP.
The IP address ranges from 224.0.0.0 through 239.255.255.255.
Enter the port for the multicast. The port ranges from 1025 through
65000.
You can use the multicast IP address to login the web.
On the web login dialog box, in the Type list, select Multicast. The
web will automatically obtain the multicast IP address and join.
Then you can view the video through multicast function.
The Alarm Center interface is displayed.
Description
Enable the alarm center function.
Performance Series Embedded NVR User Guide