Figure 215 Default - Honeywell Performance Series User Manual

Default
Note: This function is for admin account only.
You can select the settings that you want to restore to the factory
default.
1. Go to Main Menu > Information > Manager > Default.

Figure 215 Default

2. Restore the settings.
•
•
a. Enter the admin password in the second dialog box.
b. Click OK.
System Update
Upgrading File
1. Insert a USB storage device containing the upgrade files into the
2. Go to Main Menu > Information > Manager > Update
194
The Default interface is displayed.
Click Default, and then click OK in the prompted dialog box. The
system starts restoring the selected settings.
Click Factory Default, and then click OK in the prompted dialog box.
The system starts restoring the whole settings.
USB port of the Device.
The Update interface is displayed.
Performance Series Embedded NVR User Guide