Figure 90 Manual Check Interface - Honeywell Performance Series User Manual

Manual Check
1. Go to Main Menu > Storage > Disk Check > Manual Check.

Figure 90 Manual Check Interface

2. In the Type list, select Key Area Detect or Global Check; and in the
3. Click Start Check.
Note: When system is detecting HDD, click Stop Check to stop current
detection. Click Start Check to detect again.
Detect Report
After the detect operation, you can go to the detect report to view
corresponding information. Replace the malfunction HDD in case there
is data loss.
1. Go to Main Menu > Storage > Disk Check > Check Report.
84
The Manual Check interface is displayed.
Disk list, select the HDD that you want to detect.
The system starts detecting the HDD and displays the detection
information.
The Check Report interface is displayed.
Performance Series Embedded NVR User Guide