Figure 100 iSCSI
2. Set parameters.
Table 45 iSCSI Parameters
Parameter
Server Address
Port
Storage Path
Username, Password
3. Click Apply.
Configuring System Settings
General
Basic Information
You can set device basic information such as device name, and serial
number.
1. Go to Main Menu > System > General > Basic.
Performance Series Embedded NVR User Guide
Description
Enter the server address of iSCSI server.
Enter the port of iSCSI server, and the default value is 3260.
Click Storage Path to select a remote storage path.
Each path represents an iSCSI shared disk and these paths are
generated when created on the server
Enter the username and password of iSCSI server.
If anonymous login is supported by iSCSI server, you can enable
Anonymous to log in as an anonymous user.
91