Honeywell Performance Series User Manual page 163

No.
3
4
5
6
7
Performance Series Embedded NVR User Guide
Function Description
Display the type and time period of the current recorded video.
•
•
•
•
Time Bar
•
•
•
•
Play Status Includes two playback status: Play and Stop.
Record type Select the check box to define the recording type to search for.
Select the content to play back: Record, Picture, Subperiod. For
Search type details about the selecting search type, refer to
detailed information.
Click the date that you want to search, the time bar displays the
corresponding record.
Calendar
The dates with record or snapshot have a small solid circle
under the date.
•
•
View Layout and
Channel
Selection
•
In the 4-channel layout, there are 4 time bars are
displayed; in the other view layouts, only one time bar is
displayed.
Click on the colored area to start playback from a certain
time.
In the situation when you are configuring the settings,
rotate the wheel button on the time bar, the time bar is
zooming in from 0. In the situation when playback is
ongoing, rotate the wheel button on the time bar, the time
bar is zooming from the time point where the playback is
located.
Time bar colors: Green indicates general type; Red
indicates external alarm; Yellow indicates motion
detection; Blue indicates intelligent events; Purple
indicates POS events.
Click and hold the time bar, and the mouse pointer shall
change to a hand icon, and then you can drag to view the
playback of the target time.
You can drag the vertical orange line on the time bar to
rapidly view the playback in iframe format.
When playing back video in one channel mode, you can
move mouse pointer to time bar for 0.1 seconds to display
thumbnail pictures for the video of selected. Four pictures
before and four pictures after the selected time, and the
thumbnail picture of the selected time will be displayed.
For some models, when you are clicking on the blank area
in the time bar, the system automatically jumps to the
next time point where there is a recorded video located.
In the Camera Name list, select the channel(s) that you
want to play back.
The window split is decided by how you select the
channel(s). For example, if you select one channel, the
playback is displayed in the single-channel view; if you
select two to four channels, the playback is displayed in
the four-channel view. The maximum is eight channels.
Click to switch the streams.
stream, and indicates sub stream.
Search Type for
indicates main
139