4. Click Apply button to complete the setup. System needs to restart
Record Mode
After set schedule record or schedule snapshot, you need to enable auto
record and snapshot function so that system can automatically record or
snapshot.
•
•
Note: You need to have storage authorities to implement the Manual record
operation. Make sure the HDD has been properly installed.
1. Right-click on the live view interface, and then go to Main Menu >
Figure 87 Record Mode
2. Configure parameters.
Table 43 Record Mode Parameters
Parameter
Channel
Performance Series Embedded NVR User Guide
to activate current setup if you want to format the HDD.
Auto: System automatically records at the type and record period you
set in Schedule interface.
Manual: System records general files for all day.
Storage > Record Mode.
Description
Displays all the analog channels and the connected digital channels. You
can select a single channel or select All.
81