Figure 144 Sequence Interface; Figure 145 Current Channel Sequence - Honeywell Performance Series User Manual

Figure 144 Sequence Interface

2. On the edit view interface, drag the channel to the desired window,

Figure 145 Current Channel Sequence

3. Click Apply to save current channel sequence.
•
•
Performance Series Embedded NVR User Guide
or drag on the preview window to switch the position.
Check the channel number at the right bottom corner to view the
current channel sequence.
After you change the channel sequence, click Cancel or right-click
the live view interface, device pops up the dialogue box.
Click OK to save current settings.
Click No to exit without saving the settings.
129