Figure 180 Scene Changing - Honeywell Performance Series User Manual

Figure 180 Scene Changing

2. To configure the settings for the scene change parameters, see
3. The scene change function does not have region and sensitivity
4. Click Apply to complete the settings.
•
•
PIR Alarm
When the detected scene has changed, system can generate an alarm.
PIR function helps enhancing the accuracy and validity of motion detect.
It can filter the meaningless alarms that are activated by the objects
such as falling leaves, flies. The detection range by PIR is smaller than
the field angle.
PIR function is enabled by default if it is supported by the cameras.
Enabling PIR function will get the motion detect to be enabled
automatically to generate motion detection alarms; if the PIR function is
not enabled, the motion detect just has the general effect.
1. Go to Main Menu > Event > Video Detection > PIR.
158
Motion Detection.
items.
Click Default to restore the default setting.
Click Copy to, in the Copy to dialog box, select the additional
channel(s) that you want to copy the motion detection settings to,
and then click Apply.
The PIR interface is displayed.
Performance Series Embedded NVR User Guide