Mouse Operation; Table 14 Mouse Operation Instruction - Honeywell Performance Series User Manual

No.
6
7
8
9

Mouse Operation

Refer to the following sheet for mouse operation instruction.

Table 14 Mouse Operation Instruction

Operation
Left click
mouse
Performance Series Embedded NVR User Guide
Name
MIC IN
HDMI
USB port
Alarm input port (1-4)
NO C
CTRL
P
Description
When you have selected one menu item, left click mouse to view menu
content.
Modify checkbox or motion detection status.
Click combo box to pop up drop-down list
In input box, you can select input methods. Left click the corresponding
button on the panel you can input numeral/English character (lower
case/upper case). Here← stands for backspace button. ＿ stands for
space button.
In English input mode: _ stands for input a backspace icon and←
stands for deleting the previous character.
Description
•
Audio output on 1-window video monitor.
•
Audio output on 1-window video playback.
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as microphone,
pickup.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
USB port. Connect to mouse, USB storage device and etc.
•
They receive signals from external alarm source.
Alarm input includes two types; NO (normal open)
and NC (normal close).
•
When your alarm input device is using external
power, make sure the device and the NVR have the
same GND.
GND. Alarm input ground port.
One NO activation output group. (On-off button).
Controllable power supply output. Control the output of
the on-off button alarm relay. It controls the alarm device
with the presence or absence of voltage. It can also be
used as power input for some alarm devices such as alarm
detectors.
Power output port. It can provide power to some
peripheral devices such as camera and alarm device.
Make sure the power supply of peripheral device shall be
below 1A.
13