Figure 103 Holiday - Honeywell Performance Series User Manual

Parameter
Time Format
DST
Start Time
End Time
NTP
Server Address
Port
Interval
4. Click Apply to save settings.
Holiday
1. Go to Main Menu > System > General > Holiday.

Figure 103 Holiday

2. Click Add, the Add Holidays interface is displayed.
94
Description
In the Time Format list, select 12-HOUR or 24-HOUR for
the time display style.
Enable the Daylight Saving Time function. Click Week or
Date.
Configure the start time and end time for the DST.
Enable the NTP function to sync the Device time with the
NTP server.
If NTP is enabled, device time will be automatically
synchronized with server.
In the Server Address box, enter the IP address or domain
name of the corresponding NTP server.
Click Manual Update, the Device starts syncing with the
server immediately.
The system supports TCP protocol only and the default
setting is 123.
In the Interval box, enter the amount of time that you want
the Device to sync time with the NTP server. The value
ranges from 0 to 65535.
The Holiday interface is displayed.
Performance Series Embedded NVR User Guide