Honeywell Performance Series User Manual page 145

Icon
Channel Info
After the remote device registered to the corresponding channel, you can
view its status such as alarm status, record status, connection status,
record mode, etc.
•
•
•
•
Click
can view information of the corresponding channel.
Performance Series Embedded NVR User Guide
Function
Open the PTZ control panel.
Open the Color Setting interface.
This function is supported only in single-channel layout.
Open the record search interface.
Open the Voice Broadcast interface.
Open the Alarm Status interface to view the device alarm status.
Open the Channel Info interface to display the information of each
channel.
Open the Add Camera interface.
Open the NETWORK interface.
Open the Disk Manager interface.
Open the USB Management interface.
Alarm status: It includes motion detection alarm, video loss alarm,
tampering alarm.
Record status: System is recording or not.
Bit Rate: System displays bit rate information.
Status: current channel connection status.
, system goes to the channel information setup interface. You
121