Web Operation; Network Connection - Honeywell Performance Series User Manual

CHAPTER
4
This chapter is intended for remote users of the NVRs. It describes how to
access Honeywell's Performance Series Network Video Recorder remotely
using a browser-based web client.
This chapter contains the following sections:
•
Network
•
Web
•
Web Main Menu,
Note: •
•

Network Connection

Ensure that the following conditions are met:
•
•
•
Performance Series Embedded NVR User Guide

WEB OPERATION

Connection, page
Login, page 200
201
page
The interfaces in the Manual are used for introducing the
operations and only for reference. The actual interface might be
different dependent on the model you purchased. If there is
inconsistency between the Manual and the actual product, the
actual product shall govern.
Besides Web, you can use our HDCS to login the device. For
detailed information, refer to HDCS user guide.
Ensure that the network connection is good.
Ensure that the NVR and PC network setup is correct. See the
network setup: Main Menu > Setting > Network.
Ping to ensure that the network connection is good. Ping *** *** ***
*** (where *** *** *** *** is the NVR's IP address). The return TTL
should be less than 225.
199
199