Camera Name; Figure 50 Snapshot; Table 25 Snapshot Interface Parameters - Honeywell Performance Series User Manual

Figure 50 Snapshot

2. Configure parameters.

Table 25 Snapshot Interface Parameters

3. Click Apply.

Camera Name

1. Go to Main Menu > Camera > Camera Name.
Performance Series Embedded NVR User Guide
Parameter Description
In the Manual Snapshot list, select how many snapshots you want to
Manual Snapshot
take each time.
In the Channel list, select the channel that you want to configure the
Channel
settings for.
In the Type list, you can select Scheduled, or Event.
Scheduled: The snapshot is taken during the scheduled period.
Type
Event: The snapshot is taken when there is an alarm event occurs, such
as motion detection event, video loss, and local alarms.
In the Size list, select a value for the image. The bigger the value is, the
Size
better the image will become.
Configure the image quality by 6 levels. The higher the level is, the
Quality
better the image will become.
Configure or customize the snapshot frequency. Max. supports 3600
Interval
seconds/image.
The Camera Name interface is displayed.
49